Product Overview
The multi-projection welding machine applies synchronized electrical current and mechanical pressure across multiple contact points simultaneously within a single operational cycle. This specialized resistance welding system concentrates thermal energy precisely onto pre-formed embossments, weld nuts, or raised profile locations on metal stamped components. By localizing high electrical resistance at the projection sites and following up with controlled forging force, the equipment forms consistent multiple weld nuggets simultaneously. This methodology minimizes thermal distortion, eliminates secondary repositioning steps, and ensures high structural rigidity for complex multi-point sheet metal assemblies across demanding industrial applications.
Working Principle
The upper platen aligns multiple electrodes or partitioned contact blocks with pre-formed projections on the workpiece. Upon mechanical clamping, synchronized secondary current flows through every contact point in parallel. The localized high electrical resistance at each projection melts the material instantly, and subsequent forging pressure consolidates the multiple joints into a single uniform assembly.
Key Features
Synchronized Multi-Point Firing: Independent or parallel transformer secondary circuits distribute balanced electrical current to eliminate current shunting variations across multiple contact locations.
Four-Column Rigid Gantry Structure: Heavy-duty mechanical framework minimizes structural deflection and angular displacement under high clamping loads.
Independent Floating Electrode Design: Multi-actuator or articulated upper holders compensate for minor workpiece thickness tolerances to maintain equal pressure distribution at every projection.
Multi-Stage Programmable Sequencing: Closed-loop microprocessor controllers regulate squeeze time, pre-weld slope, weld duration, hold time, and forging pressure profiles.
Standardized Tooling Mounting Interface: Precision-machined sub-plates and T-slot lower die bases enable rapid fixture alignment and reduced changeover downtime.
Applications
Automotive Structural Brackets: Simultaneous welding of multiple weld nuts, threaded studs, and reinforcement plates onto high-strength steel automotive stampings.
Appliance Enclosures & Frames: Multi-point projection assembly of internal metal frames, refrigerator structural panels, and stove reinforcement brackets.
Electrical Busbar Assemblies: Simultaneous batch joining of multi-contact copper terminals, silver electrical contacts, and power distribution busbars.
Technical Specifications
|
Technical Parameter |
Specification Unit |
Standard Configuration |
Customizable Range |
|
Rated Output Capacity |
kVA |
150 – 300 |
TBD based on weld count |
|
Input Voltage |
V / Hz |
380V / 415V, 50Hz / 60Hz |
Customized to regional power standards |
|
Maximum Electrode Force |
kN |
15 – 50 |
Customized per part contact area |
|
Throat Depth |
mm |
500 – 800 |
Extended depths available |
|
Working Stroke |
mm |
100 – 250 |
Adjusted for loading clearance |
|
Number of Welding Points |
Points |
2 – 8 simultaneous points |
Multi-channel scaling |
|
Control System |
Type |
Microprocessor PLC + Touch HMI |
Closed-loop current monitoring |
|
Cooling Water Flow |
L/min |
15 – 30 |
Integrated chiller connection |
Customization Options
Electrode & Fixture Configuration: Custom-machined copper alloy lower dies and multi-tip upper holders engineered to exact component geometries and projection layouts.
Clamping & Positioning Mechanisms: Pneumatic part locator pins, rapid mechanical toggle clamps, and error-proofing optical sensors.
Feeding & Material Handling: Manual loading shuttle tables, sliding guide rails, or robotic pick-and-place integration interfaces.
Control & Monitoring Systems: Multi-channel current sensors, proportional pressure valves, displacement transducers, and quality data logging modules.
Sample Testing & Quality Validation
Blueprint & Geometry Analysis: Engineering review of customer part drawings, material specifications, and projection layout tolerances.
Prototype Trial Welding: Physical sample testing using customer-supplied metal sheets to verify nugget diameter, tensile strength, and absence of surface burn-through.
Destructive & Metallurgical Inspection: Micro-section analysis, shear testing, and peel testing conducted to confirm weld integrity against industrial standards.
Pre-Shipment Calibration Report: Final verification including electrical insulation checks, pressure calibration curves, and operational cycle testing.
FAQ
Q: How does the system prevent current shunting when welding multiple projections simultaneously?
A: The machine utilizes isolated secondary transformer circuits or balanced current distribution paths to ensure equal energy delivery across all contact points, preventing preferential current flow through lower-resistance joints.
Q: What sheet metal thickness ranges are suitable for multi-projection welding?
A: It accommodates stamped sheet components ranging from 0.5 mm to 4.0 mm, provided projection dimensions comply with standard resistance welding design ratios.
Q: Can the tooling be adapted if part geometry changes during production updates?
A: Yes. The modular upper platen and lower die base allow individual fixture inserts to be replaced without modifying the core press frame.
Q: What data output options are available for quality tracking?
A: The controller records real-time welding current, applied force, and cycle duration for every weld, with export options for factory data networks.
Q: What utility supplies are required for installation?
A: The installation site requires a stable three-phase industrial power feed, a compressed air supply of 0.5 to 0.7 MPa, and a closed-loop industrial water cooling system.
Hot Tags: multi-projection welding machine, China multi-projection welding machine manufacturers, suppliers, factory, automated resistance welding equipment, Industrial Spot Welding Machine, reinforcing mesh welding machine, spot welding stainless steel sheet, spot welding usb, wedge wire screen welding machine

