Stranded Wire Resistance Welding Machine

Stranded Wire Resistance Welding Machine

The Stranded Wire Resistance Welding Machine is an automated industrial system engineered to consolidate and fuse multi-strand copper or aluminum wires into solid, uniform terminal blocks in a single operation. Utilizing precise thermal-electrical energy input, the equipment applies controlled mechanical pressure and high-density current to bond individual fine strands without solder or flux. This process eliminates strand fraying, reduces electrical contact resistance, and delivers high mechanical pull strength. It is built for high-throughput production lines in the automotive wiring harness, electric vehicle power distribution, and electrical manufacturing sectors where joint reliability and low electrical loss are mandatory.

Product Overview


The Stranded Wire Resistance Welding Machine is an automated industrial system engineered to consolidate and fuse multi-strand copper or aluminum wires into solid, uniform terminal blocks in a single operation. Utilizing precise thermal-electrical energy input, the equipment applies controlled mechanical pressure and high-density current to bond individual fine strands without solder or flux. This process eliminates strand fraying, reduces electrical contact resistance, and delivers high mechanical pull strength. It is built for high-throughput production lines in the automotive wiring harness, electric vehicle power distribution, and electrical manufacturing sectors where joint reliability and low electrical loss are mandatory.

 

Working Principle


The machine operates through synchronous mechanical clamping and resistance heating. Multiple strands of wire are placed inside a precision-machined slot between two opposing electrodes. Upon cycle initiation, the pneumatic or servo-driven clamping mechanism applies stable, repeatable pressure to compact the strands into a dense matrix. A controlled pulse of low-voltage, high-amperage current is then discharged through the contact zone. The localized Joule heat rapidly softens and diffuses the metal at the contact points, fusing the individual filaments into a solid metallurgical mass at the tip while preserving the flexibility of the remaining wire body.

 

Key Features


Precision Clamping Mechanism: Utilizes rigid, parallel-closing slide guides to prevent strand migration and ensure uniform pressure distribution across all filaments.


Microprocessor Energy Control: Employs closed-loop current and voltage feedback monitoring to dynamically compensate for resistance fluctuations during the weld cycle.


Pneumatic / Servo Force Regulation: Delivers adjustable, multi-stage pressure profiles to accommodate varying wire cross-sections and material hardness.


Integrated Water Cooling: Circulates temperature-controlled coolant directly through the electrode holders to prevent thermal deformation during continuous high-duty operation.


Modular Tooling Design: Features quick-change electrode jaws that allow fast reconfiguration for different wire gauges and bundle geometries.

 

Applications


New Energy Vehicle Harnesses: Fusing multi-strand copper conductors for high-voltage battery cables and inverter connection terminals.


EV Charging Assemblies: Consolidating flexible stranded leads within high-current DC fast-charging plug interfaces.


Industrial Electrical Terminals: Joining stranded flexible shunts, busbar connections, and earthing braids in power distribution equipment.


Appliance Wiring Components: Terminating high-temperature internal wiring harnesses for heavy-duty commercial heating and cooling units.

 

Technical Specifications

 

Technical Parameter

Specification Value

Input Power Supply

AC 380 V / 220 V ± 10%, 50 Hz / 60 Hz

Rated Secondary Current

2,000 A – 10,000 A (Adjustable)

Welding Time Range

1 ms – 999 ms

Electrode Clamping Force

200 N – 3,000 N (Pneumatic / Servo regulated)

Processable Wire Cross-Section

1.5 mm² – 120 mm²

Cooling Water Flow Rate

≥ 5 L/min (0.2 MPa – 0.3 MPa)

Control System

Microcontroller / PLC with touchscreen interface

Machine Dimensions

850 mm × 650 mm × 1,200 mm

 

Customization Options


Electrode Profiles: Custom-engraved jaw geometries tailored to specific rectangular, square, or circular strand cross-sections.


Clamping Fixtures: Specialized pneumatic or manual clamping jigs designed for pre-stripped cables or integrated terminal lugs.


Force Feedback Integration: Load cell additions for real-time verification of applied mechanical pressure during every weld cycle.


Automation Interfaces: I/O signal integration and Ethernet communication protocols for automated assembly line integration.


Enclosure & Workstation Layouts: Benchtop configurations or standalone ergonomic cabinets with integrated safety light curtains.

 

Sample Testing & Quality Validation


Sample Evaluation: Engineering review of customer-provided wire samples to determine optimal cross-sectional area, material composition, and strand count.


Weld Trial Execution: Laboratory test welds performed across a matrix of current, time, and pressure parameters to establish optimal settings.


Destructive & Electrical Testing: Pull-force destruction testing, micro-section metallurgical analysis, and millivolt drop resistance measurements to verify joint integrity.


Process Documentation: Delivery of complete weld parameter logs, sample cross-section micrographs, and pull-test reports for client sign-off before equipment dispatch.

 

FAQ

 

Q: How does this machine prevent individual strands from splaying or breaking during welding?

A: The machine uses parallel-closing slide jaws that apply uniform mechanical pressure around the entire bundle before current is applied, locking the filaments in place.

Q: Can this equipment weld both copper and aluminum stranded wires?

A: Yes, by configuring specific multi-stage current profiles and appropriate electrode materials to account for the thermal and electrical conductivity differences of each metal.

Q: What maintenance is required for the welding electrodes?

A: Regular cleaning of contact faces to remove oxidation debris, along with periodic dressing or replacement of electrode jaws based on production output volume.

Q: Is pre-stripping of wire insulation mandatory before welding?

A: Yes, insulation must be stripped from the target joining zone, though the machine consolidates the bare strands without requiring separate flux or solder addition.

Hot Tags: stranded wire resistance welding machine, China stranded wire resistance welding machine manufacturers, suppliers, factory, 10 kva spot welding machine, electroweld spot welding machine, pro spot welding machine, pulse sparkle spot welder, stationary spot welding machine, table spot welding machine

Send Inquiry